Skip to main content
Skip to main navigation
Illinois State University

Map Network Drives in Mac OS X

Follow these directions to map network drives using a Mac OS X computer.

Before You Begin

When you connect to a shared folder on a remote computer, it is known as mapping a network drive (sometimes also called mounting a volume). This article describes how to map network drives in Mac OS X.

To map network drives:

  • You must know the appropriate network path
  • You must know the user name and password to the shared folder, or it must be an open, unprotected shared folder.
  • Some shared folders might have network restrictions (such as IP-based restrictions) as well.

 

Mapping Network Drives

To map network drives in Mac OS X, do the following:

  1. If you are off campus and want to connect to a computer or server on campus, you must first connect through VPN. For more information, refer to the Network Requirements section of this article below.
  2. On the Finder menu bar, click Go > Connect to Server.
  3. Enter a network path in the Server Address box. For example: smb://computername/sharename.
    • Use the DNS name for the remote computer if possible.
  4. Click Connect.
  5. If you are prompted to enter a password, select Registered User.
  6. Enter your username and password.
    • When mapping network drives to computers hosted on campus, the user name might be ADILSTU\yourULID. In this case, the password is your regular, ULID password.
  7. Click Connect.

The shared folder will automatically open once it is successfully mapped to your computer. Depending on your Mac settings, a new mounted volume may be displayed on your Mac desktop. For more information on displaying a mounted volume on your desktop, see:

When you are done, you can disconnect from the remote computer by dragging the mounted volume to your trash.

More Information

For detailed information on network paths, user names and passwords, VPN, and other requirements, refer to the information found in the sections below.

Network Path

Before you can map network drives, you must know the network path to the remote computer you are attempting to access. A network path is comprised of two elements: a Computer Name and a Share Name.

When mapping network drives in Mac OS X, you must format the computer name and share name into a network path as follows:

  • smb://computername/sharename

The computer name could be either a Netbios name or a DNS name. You should use the DNS name if one is available, especially in Mac OS X. For example, Reggie Redbird wants to connect to a server maintained by his department. The server has both a Netbios name, “Redserver,” and a DNS name, “Redserver.ilstu.edu.”

The share name is the name of the shared folder on the remote computer to which you are attempting to connect. A remote computer could have many shared folders. Some shared folders contain the dollar sign symbol . For example, there are many shared folders on Redserver, but Reggie Redbird is only interested in accessing the folder named DeptData$.

To access the DeptData$ shared folder on Redserver, Reggie should use one of these network paths:

  • smb://Redserver/DeptData$
  • smb://Redserver.ilstu.edu/DeptData$ (Recommended)

For details on the correct network path to use, contact your department’s technical support staff for assistance accessing departmental servers. For general help, contact the Technology Support Center.

Permissions

To map network drives, you must be granted the necessary permissions to the shared folder on the remote computer. The person responsible for managing the remote computer must grant you access before you can successfully connect to the shared folder.

Some shared folders are “open” and do not require special permissions. Anyone can connect to an open shared folder.

When you map network drives to a shared folder, you may be prompted to enter a user name and password. The user name and password you should use depends on several factors. Some shared folders, especially those offered through Illinois State, require you to specify the domain along with your user name.

When mapping network drives to a server or computer hosted by the University, you should usually use the domain, ADISLTU, in conjunction with your ULID. Your user name should be formatted like this:

  • ADILSTU\yourULID

However, not all shared folders offered through the University will require a user name like this. For details on which user name to use and how to format it, contact your department’s technical support staff for assistance accessing departmental servers. For general help, contact the Technology Support Center.

Network Requirements

To map network drives to computers hosted by Illinois State, you must be connected to the campus network. If you are off campus, you must first establish a VPN connection to the campus network. For more information, please refer to:

 

 

Similar Articles